You're reading from Learn Robotics Programming Build and control AI-enabled autonomous robots using the Raspberry Pi and Python

Product type Paperback

Published in Feb 2021

Publisher Packt

ISBN-13 9781839218804

Length 602 pages

Edition 2nd Edition

Languages

Python

Tools

Raspberry Pi

Concepts

Robotics

Author (1):

Danny Staple

Preface

1. Section 1: The Basics – Preparing for Robotics

2. Chapter 1: Introduction to Robotics FREE CHAPTER

3. Chapter 2: Exploring Robot Building Blocks – Code and Electronics

4. Chapter 3: Exploring the Raspberry Pi

5. Chapter 4: Preparing a Headless Raspberry Pi for a Robot

6. Chapter 5: Backing Up the Code with Git and SD Card Copies

7. Section 2: Building an Autonomous Robot – Connecting Sensors and Motors to a Raspberry Pi

8. Chapter 6: Building Robot Basics – Wheels, Power, and Wiring

9. Chapter 7: Drive and Turn – Moving Motors with Python

10. Chapter 8: Programming Distance Sensors with Python

11. Chapter 9: Programming RGB Strips in Python

12. Chapter 10: Using Python to Control Servo Motors

13. Chapter 11: Programming Encoders with Python

14. Chapter 12: IMU Programming with Python

15. Section 3: Hearing and Seeing – Giving a Robot Intelligent Sensors

16. Chapter 13: Robot Vision – Using a Pi Camera and OpenCV

17. Chapter 14: Line-Following with a Camera in Python

18. Chapter 15: Voice Communication with a Robot Using Mycroft

19. Chapter 16: Diving Deeper with the IMU

20. Chapter 17: Controlling the Robot with a Phone and Python

21. Section 4: Taking Robotics Further

22. Chapter 18: Taking Your Robot Programming Skills Further

23. Chapter 19: Planning Your Next Robot Project – Putting It All Together

24. Other Books You May Enjoy

Exercises

In Chapter 2, Exploring Robot Building Blocks – Code and Electronics, you created block diagrams for a different robot. Consider what chassis, power, and parts it needs. Use online vendors to find suitable parts.
Consider whether there is a suitable combination of Raspberry Pi hats or bonnets that fit your design. Use resources such as https://pinout.xyz to check their pin usage is compatible.
What power systems might be suitable for the Raspberry Pi and the output devices in your new design?
Are there components that may need to be removed easily? How could you approach that? Can you come up with alternatives to hook and loop tape? Keep it simple.
Make a test-fitting sketch for your new robot parts, checking that they fit using part dimensions.