Take out your frame and connect the parts together, as directed in the manual. However, I have a few suggestions to help you to carry out a better assembly of the frame:
- Firstly, connect the motor mounted with the legs or wings or arms of the frame. Tighten them firmly, as they will carry and hold the most important equipment of the drone. Then, connect them to the base and, later, the other parts with firm connections.
- Now, we will calibrate our ESCs. We will take the signal cable from an ESC (the motor is plugged into the ESC; careful, don't connect the propeller) and connect it to the throttle pins on the radio. Make sure the transmitter is turned on and the throttle is in the lowest position.
- Now, plug the battery in to the ESC and you will hear a beep. Now, gradually increase the throttle from the transmitter. Your motor will start spinning...
