Deploying the NSX Manager virtual appliance

Deploying the NSX Manager virtual appliance is the first step to enabling network virtualization in your vSphere environment. In this recipe, you will go through the steps to enable your environment for NSX.

The following diagram depicts the logical process of enabling your environment for network virtualization, and the first four steps will be covered in this chapter:

Getting ready

Before deploying NSX Manager, the following prerequisites need to be satisfied:

• Static IP address and portgroup for NSX Manager
• Firewall ports open between NSX Manager, vCenter server, and ESXi VMKernel 0 Interface on each host (refer to Appendix for a complete list of ports)
• Forward and reverse DNS entries for NSX Manager
• NTP server is accessible; minimum of four is recommended for accurate time
• Shared datastore for the appliance to be deployed onto
• Satisfy minimum requirements for NSX Manager
• Fill in the following table before deployment (removing prefilled data to reflect your environment):

Component	Value
NSX appliance name	nsxmgr-01a
NSX Manager hostname	nsxmgr-01a
vSphere cluster	RegionA01
Datastore	vsanDatastore
vSphere network (Portgroup)	VM Network
IPv4 address	192.168.1.111
Subnet mask	255.255.255.0
Default gateway	192.168.1.254
Domain name	corp.local
DNS server(s)	192.168.1.100
NTP servers(s)	192.168.1.100 (Use four in production)
Enable SSH	yes
CLI password	VMware1!
CLI privilege password	VMware1!

How to do it...

The following steps will detail how to deploy the NSX Manager appliance:

1. Log into the vSphere Web Client
2. Select Hosts and Clusters, right-click on the target cluster and select Deploy OVF Template

3. Select Local File and locate the NSX Manager OVA downloaded earlier; click on Next
4. Type in the Name of the virtual appliance and click on Next
5. Select the vSphere cluster and resource where you want to deploy NSX Manager and select Next
6. Review details, Accept license agreements and click on Next
7. Select the shared datastore of where you want the virtual appliance to be deployment onto
8. Select the VLAN-backed portgroup as defined earlier and click on Next
9. Fill in the template details as highlighted in the preceding table and click on Next
10. Ensure all details are correct and click on Finish: