Attaching the Intelligent Hub
This next part is the really exciting part because this is where you will add the brains of the operation—you will start to see Plankton come to life with this section of building.
To kick things off, you will need the following pieces:
- Two black 5x7 open frames
- Eight black connector pins
The required pieces can be seen in the following image:
Figure 9.62 – Parts layout
Each open frame will have four black connector pins attached to it. Two will be on the edge pin holes, on the 5L side. Along the 7L side at the bottom, add the other two black connector pins, as illustrated in the following image:
Figure 9.63 – Black connector pins added to open frames
Using these two black connector pins, connect each open frame to the motor that will activate the mouth of the robot, as illustrated in the following image:
Figure 9.64 – Open frames...
