Time for action – setting up the AP with FreeRadius-WPE
Follow the given instructions to get started:
Connect one of the LAN ports of the access point to the Ethernet port on your machine running BackTrack. In our case, the interface is
eth1
. Bring up the interface and get an IP address by running DHCP as shown in the following screenshot:Log in to the access point and set the Security Mode to WPA-Enterprise. Then, under the EAP (802.1x) section, enter the RADIUS server IP Address as 192.168.0.198. This is the same IP address allocated to our wired interface in step 1. The RADIUS server Shared Secret would be test as shown in the following screenshot:
Let us now open a new terminal and go to the directory
/usr/local/etc/raddb
. This is where all the FreeRadius-WPE configuration files are:Open
eap.conf
, you will find that thedefault_eap_type
is set topeap
. Let us leave this as it is:Open
clients.conf
. This is where we define the allowed list of clients that can connect to our RADIUS server...